Your Guide to Fixing a Leaky Faucet

Even if the sound of that dripping faucet doesn’t keep you up at night, the thought of the thousands of gallons of clean water going to waste ought to. A leaking faucet can have a significant impact on your water bill. It therefore makes sense to invest in faucet repair as soon as you notice that leak. It helps that repairing a faucet can be quick and inexpensive. With the tips below, you may even be able to repair it yourself. There’s really no reason to put off getting that dripping tap fixed.

Common Causes for Leaks

Before you search for ‘steps to fix leaky faucet’ it is important to know why the tap is leaking in the first place. This will enable you to repair it effectively. One of the most common causes for leaks in taps is a worn out gasket or washer. Other common reasons for leaks are corrosion in the valve seat and a loose O-ring. If your tap is older, it may be damaged or deteriorated to the point that it needs to be replaced.

How to Fix a Leaky Faucet

Below is a step by step fix dripping faucet guide.

  1. Shut off the water supply

Check below the sink for a shut off valve and turn it off. If there is none, you should turn off the main supply to the house. Turn on the tap to let any remaining water run out.

  1. Remove the tap handle

The method you use to remove the handle will depend on the type of tap you are dealing with.

  • Tap with set screw

Insert an Allen wrench or hex key into the screw and remove the screw. Pull the handle free. If the tap has a top screw cover, you will need to pry it off before removing the screw.

  • Shower and bathtub taps

Remove the cap on the handle and unscrew the handle. Pry or unscrew the faceplate off the shower wall and remove it. Unscrew or pull the metal sleeve off and pry the locking clip off with a screwdriver or needle nose pliers.

  1. Remove the stem or cartridge

This is often present in two-handled taps. This part is what helps the tap to regulate the flow of cold and hot water. Use a wrench to loosen the packing nut and remove the handle assembly. Pull the cartridge or stem out of the assembly.

  1. Inspect the cartridge

Inspect the stem or cartridge for damage. If it is damaged, it should be replaced. It is important that you use the right sized and shaped cartridge or step to replace your old one. The easiest way to find the right part is to refer to the manufacturer and search for parts for the tap model number. If you’re not sure, you can always take the part with you to the hardware for comparison and match it to the exact same part.

  1. Replace the stem or cartridge

Clean the area around the handle using a cloth and cleaning solution. Inspect the O-rings for damage. These should be replaced if they are worn or damaged. Insert your new parts in the reverse order you took them out and ensure they are aligned properly.

  1. Reattach the handle

Reattach the tap handle by reversing the steps you used to take it off. Turn on the water supply and check that the tap is working. Be sure to run both hot and cold water for a few minutes. Turn the tap off and check if the tap is dripping.

These are steps you can use for simple repairs. If you want to be sure your faucet is repaired properly or are dealing with more complex plumbing issues, don’t hesitate to contact Sno Falls Plumbing for faucet repair North Bend services.